the smaller the better
A123Systems CEO (CEO) and Chief Executive David viaud (David Vieau) are eager to develop nano-phosphate technology Canon Camcorder battery market. Viaud said the company is actively engaged with the investor handset manufacturer Motorola Inc. (Motorola, hereinafter referred to as Motorola) and Qualcomm (Qualcomm, hereinafter referred to as a high-pass) to negotiate. A123Systems is also involved with the hydrogen fuel vehicle-related projects DSLR Battery Grip. However, if you want into the notebook computer applications, they still have to wait several years.
In addition to bringing a number of advantages for phosphate addition, A123Systems nano-technology also reduces the canon BP-511 battery in the single-particle size, its lithium-ion technology, from the traditional average of 1 micron and more reduced to 100 nanometers, or about the original a volume of 1%.
Smaller particles can be faster than the average absorption of lithium batteries, the battery charging speed so quickly. For example, if a lithium-ion batteries with ordinary mobile phone charging time need 2 ~ 3 hours, then using this new type of canon BP-512 battery as long as the short span of 5 to 10 minutes can is full, viaud added. Ordinary cell phone battery can be charged 300 ~ 400 times, and A123Systems of technology to increase that figure to 7,000 times.
Battery manufacturers are trying a variety of chemical formulations in order to find an alternative to even more than lithium-ion technology. Zinc Matrix Power Company’s CEO and president Ross • Dube (Ross Dueber) believes that his company’s alternative to chemical canon DM-MV30 battery Grip next year can be commercially deployed. Intel is the company’s investors, and in September 2006 Intel Developer Forum (Intel Developer Forum) on the nomination of the company to “accelerate the technological innovation Award” winner.
Dube said the company’s approach is the use of silver and zinc, lithium-ion offers two times the duration of use, and its water-based chemicals that are neither flammable nor toxic. The company was originally focused on military applications, two years ago, was Intel’s investment, then it changed directions of research focused on the development of a use of time can be up to 10 hours of laptop battery.
“Lithium-ion canon NB-2L battery 15 years ago had started, when its life span is only half the nickel-metal hydride batteries. But use the time was 30% longer than the latter, so the price is still acceptable to consumers.” Dube added .
Zinc Matrix Power planned with laptop and mobile phone manufacturers to work together in preparation for next year will be a new design into production. Dube revealed that at the early stage of this technology is likely to be classified as “Road Warrior Notebook” and other more high-end equipment options.
The first air purification technology used in smart car air purifier
Recently, China’s air purification technology in the car a major canon NB-2LH battery Grip breakthrough, a number of air purification technology smart car was first successfully applied in the field of air purification.
To achieve solar power, rechargeable battery power and car power supply three kinds of intelligent switching between the work of energy, intelligent management of energy, energy-saving environmental protection, regardless of whether the car starts, weather conditions, all-weather car cleaning work are conducted smoothly and people can do to boot, people go off. This two or three years ago was a dream of environmental clean-car experience, by the ADA launched the first intelligent solar car air purifier canon ZR-CV battery brought the car owners around.
It is reported that new smart Model Air Purifier uses a number from the U.S. Air Purification Technology: Space capsule TM plasma purification technology, aerospace grade nano-activated carbon adsorption technology, 1000 World Wide Web, he oxygen technology, aviation and intelligent sensor technology , “day by day” solar power system, have been used in a special carrying the Apollo moon-landing program and the “Spirit” Mars rover Apollo intelligent control system, from the inside out everywhere the shadow of aviation technology, intelligent features also were apparent.
Apollo767 is a collection of a number of air purification technology applied to the field inside the first air purification products, the application of the “daily” solar power system continues the company’s purification products in the car on the advantages of solar energy technology canon BP-608 battery Grip as well as fresh breakthrough, use aircraft-grade high-performance monocrystalline solar panels, the first application of 0-90 º angle of adjustment within the framework of freedom of design, to maximize the utilization of solar energy, environmental protection and energy conservation; application of intelligent sensor technology, aviation, through the full range of vibration sensors Intelligent sensing changes in the environment, sensitive to detect vibration signals, the door opens automatically start cleaning, vibration signal disappeared after 5 minutes automatic shutdown switch to solar power charger, switch machines require little effort is also easy to save, displaying the user-friendly and automated design .
According to reports, this new generation of solar energy charging device is a solar energy technology in the latest achievements in the field of photovoltaic conversion, “Solar Box” The biggest feature is the direct use of solar energy into electrical energy to mobile phones, digital cameras and other digital products Digital Camera Battery Grip charger, but also electrical energy can be stored in the built-in battery in to prepare for rainy days or non-sunlight conditions of use.
Yang, chairman of the Shenzhen Science and Technology, according to Mr. Xu Yuti, at present the application of solar energy into light and heat is quite popular, but market prospects for broader application of photoelectric conversion of solar energy in China has just started, from the goal of universal coverage is still far away . “Daylight’s Box,” the emergence of which will undoubtedly promote the development of solar energy photoelectric conversion applications to canon CV-11 battery Grip allow consumers to experience the real benefits of solar energy technology.
Wednesday, March 31, 2010
Tuesday, March 30, 2010
the battery maintenance
the battery maintenance
:In the process of using the panasonic NV-DS30 battery, follow the "full full release" principle, do not eat too full, do not be too tired. Be careful not to short-circuit the battery, this is very dangerous. Do not tear up the battery's plastic skin, as this may easily lead to short-circuit, the same is very dangerous. Do not disassemble the battery or the battery into the fire. A long time do not use the panasonic CGR-D08 battery should be filled with storage, re-opening of the first discharge, then charge to use. Try to match the use. If we could do the above, we will always keep the battery in good condition, the better their services for the majority of DX. If you are a rice person, do not care, then I'll do anything, and I was poor wretch Who does?
the panasonic CGR-D16S battery of the purchase:
Buy batteries, in addition to have a pair of piercing eyes, we must also note the following points: ① Select trusted JS, at least quality assurance; ② need to choose according to their capacity, some of the best choice for large capacity; ③ Select well-known brand panasonic SDR-H20 battery; ④ Do not freeloaders. JS said that the greater the capacity to listen, the more emphasis on the contrary, the more light, now has his own comparison is really the case every day, ha ha ha ...
focused on answers to some friend's question:
① My XXX How many batteries can shoot?
A: This is according to the battery capacity, camera power, shooting mode, use the custom to make a decision can not be generalized. In general, 50 ~ 200 or more are within the normal range, DX they do not worry.
② I bought a new panasonic VDR-M50 Battery, how making a few no electricity it? After the electric charge, they can only film scores?
A: This question is the purchase of new aircraft in general the problems encountered. Reason is that today's batteries are filled at the factory by about 5% ~ 10% of the electricity, on the one hand is easy to store, on the other hand is easy to test, so making a few they would have no electricity. The previous nickel-chrome battery factory, but totally fails in electricity oh. A new battery to go through several times after use, its capacity to achieve the nominal value, which is the so-called cell activation process. panasonic NV-GS10 Battery once activated, you can normally use. So at first unable to shoot a few are normal, with few enough.
③ How long will my battery life?
A: The battery life and users to use a great relationship, and the use of the frequency of a relationship. The quality and the battery itself is also a relationship. For example, we use the source Qi series of Panasonic Camcorder battery, both written on the packaging, "rechargeable 1000", which are only approximate, so if it's good, far more than 1000 times? Get me a pair of batteries, the Hitachi brand, and purchased in 1988, 10 yuan a, Ni-Cr 500mAh, for my walkman, but now, it continues to work for me with, but the battery jacket has been worn off, had to use transparent tape on the bag, hah ...
Having said that, basically says that is over, Do you have any questions can be Gentie discuss what is wrong with the text of the Department, the hope that DX have criticized corrections and additions.
:In the process of using the panasonic NV-DS30 battery, follow the "full full release" principle, do not eat too full, do not be too tired. Be careful not to short-circuit the battery, this is very dangerous. Do not tear up the battery's plastic skin, as this may easily lead to short-circuit, the same is very dangerous. Do not disassemble the battery or the battery into the fire. A long time do not use the panasonic CGR-D08 battery should be filled with storage, re-opening of the first discharge, then charge to use. Try to match the use. If we could do the above, we will always keep the battery in good condition, the better their services for the majority of DX. If you are a rice person, do not care, then I'll do anything, and I was poor wretch Who does?
the panasonic CGR-D16S battery of the purchase:
Buy batteries, in addition to have a pair of piercing eyes, we must also note the following points: ① Select trusted JS, at least quality assurance; ② need to choose according to their capacity, some of the best choice for large capacity; ③ Select well-known brand panasonic SDR-H20 battery; ④ Do not freeloaders. JS said that the greater the capacity to listen, the more emphasis on the contrary, the more light, now has his own comparison is really the case every day, ha ha ha ...
focused on answers to some friend's question:
① My XXX How many batteries can shoot?
A: This is according to the battery capacity, camera power, shooting mode, use the custom to make a decision can not be generalized. In general, 50 ~ 200 or more are within the normal range, DX they do not worry.
② I bought a new panasonic VDR-M50 Battery, how making a few no electricity it? After the electric charge, they can only film scores?
A: This question is the purchase of new aircraft in general the problems encountered. Reason is that today's batteries are filled at the factory by about 5% ~ 10% of the electricity, on the one hand is easy to store, on the other hand is easy to test, so making a few they would have no electricity. The previous nickel-chrome battery factory, but totally fails in electricity oh. A new battery to go through several times after use, its capacity to achieve the nominal value, which is the so-called cell activation process. panasonic NV-GS10 Battery once activated, you can normally use. So at first unable to shoot a few are normal, with few enough.
③ How long will my battery life?
A: The battery life and users to use a great relationship, and the use of the frequency of a relationship. The quality and the battery itself is also a relationship. For example, we use the source Qi series of Panasonic Camcorder battery, both written on the packaging, "rechargeable 1000", which are only approximate, so if it's good, far more than 1000 times? Get me a pair of batteries, the Hitachi brand, and purchased in 1988, 10 yuan a, Ni-Cr 500mAh, for my walkman, but now, it continues to work for me with, but the battery jacket has been worn off, had to use transparent tape on the bag, hah ...
Having said that, basically says that is over, Do you have any questions can be Gentie discuss what is wrong with the text of the Department, the hope that DX have criticized corrections and additions.
Sunday, March 28, 2010
The battery is the same charge of electricity
The battery is the same charge of electricity
, we must discharge. In addition to the normal discharge in use outside, why do we still run out of Panasonic Camcorder battery discharge it? Please come listen to me 11. When our camera due to run out of battery needed to charge the battery when we note that these exhausted batteries inside the other electrical appliances can continue to use? Furthermore, for each cell in the same one used in the electrical length of time varying? This indicates a problem, that is, the capacity of these Camcorder Battery is inconsistent. Why is there such situation? The reason is: We use electrical appliances, most are two or more battery cells made to link the battery packs, according to Ohm's law we can see that throughout the series circuit current is equal, as each cell's internal resistance can not be fully consistent with (even at the same time, the same production line out of batteries), then the voltage drop at both ends of each section and consumption of Sony NP-QM90 battery power, will not completely the same. This has resulted in the battery in the same imbalance in the relationship between the circuit, eventually leading to one or several batteries a long time in the "enough to eat, put could not finish," the state, until it is damaged. The reason why we post on the battery discharge, while abhorrent to eliminate the memory effect, on the other, so that each section of the panasonic CGA-DU21 battery as much as possible to achieve balance, together with full, finished with the release, synchronous work. Then how can we discharge it? Please keep in mind this truth: "discharge, we must separate each section of the battery discharge"! Otherwise, counter-productive, not as good as letting go. Discharge resistor or small bulbs can be purely resistive components such as discharge resistance controlled at 1.5 to 4 ohms, large discharge slow, too small to heat the panasonic VW-VBD210 battery. In practice, it is recommended to use three 3.8V parallel beads of the flashlight electrical discharge, resistance of 1.7 ohms at this time, discharge current of 700mA, less than 10 minutes, light bulbs went out on the discharge is completed, it is intuitive. You can also use the method of discharge resistors + bulb, Shi measuring about resistance, controlled at between 1.5 to 4 ohms on it. We can be converted to produce low-quality panasonic PV-BP17 battery charger discharger we want, is to buy an inferior charger (about 5 million), to better selection of housing, and this favorable for modification, and then remove the internal battery charger all electronic components, retain only the circuit board and battery clip, and then welded at both ends of each battery clip with our bulb or resistor, etc. In this way, we put appliances on the DIY better.
, we must discharge. In addition to the normal discharge in use outside, why do we still run out of Panasonic Camcorder battery discharge it? Please come listen to me 11. When our camera due to run out of battery needed to charge the battery when we note that these exhausted batteries inside the other electrical appliances can continue to use? Furthermore, for each cell in the same one used in the electrical length of time varying? This indicates a problem, that is, the capacity of these Camcorder Battery is inconsistent. Why is there such situation? The reason is: We use electrical appliances, most are two or more battery cells made to link the battery packs, according to Ohm's law we can see that throughout the series circuit current is equal, as each cell's internal resistance can not be fully consistent with (even at the same time, the same production line out of batteries), then the voltage drop at both ends of each section and consumption of Sony NP-QM90 battery power, will not completely the same. This has resulted in the battery in the same imbalance in the relationship between the circuit, eventually leading to one or several batteries a long time in the "enough to eat, put could not finish," the state, until it is damaged. The reason why we post on the battery discharge, while abhorrent to eliminate the memory effect, on the other, so that each section of the panasonic CGA-DU21 battery as much as possible to achieve balance, together with full, finished with the release, synchronous work. Then how can we discharge it? Please keep in mind this truth: "discharge, we must separate each section of the battery discharge"! Otherwise, counter-productive, not as good as letting go. Discharge resistor or small bulbs can be purely resistive components such as discharge resistance controlled at 1.5 to 4 ohms, large discharge slow, too small to heat the panasonic VW-VBD210 battery. In practice, it is recommended to use three 3.8V parallel beads of the flashlight electrical discharge, resistance of 1.7 ohms at this time, discharge current of 700mA, less than 10 minutes, light bulbs went out on the discharge is completed, it is intuitive. You can also use the method of discharge resistors + bulb, Shi measuring about resistance, controlled at between 1.5 to 4 ohms on it. We can be converted to produce low-quality panasonic PV-BP17 battery charger discharger we want, is to buy an inferior charger (about 5 million), to better selection of housing, and this favorable for modification, and then remove the internal battery charger all electronic components, retain only the circuit board and battery clip, and then welded at both ends of each battery clip with our bulb or resistor, etc. In this way, we put appliances on the DIY better.
Wednesday, March 24, 2010
Digital camera lithium-ion batteries
Digital camera lithium-ion batteries
commonly used in batteries, nickel-metal hydride batteries, nickel-chromium batteries, alkaline JVC GR-DX48 battery ... Since most digital cameras use AA Ni-MH battery power to do so in this article for AA Ni-MH battery for about focus .
Ni-MH battery features:
Nickel-metal hydride JVC Camcorder Battery (NIMH) is a modern electronic products, the most widely used battery, one green with a single large capacity, discharge characteristics of a smooth, high universality, heat a small and so on. The disadvantage is that bulky, self-weight large.
Ni-MH battery features:
Ni-MH battery nominal voltage of 1.2V, in the case of sufficient power up to 1.35V, with common AA alkaline battery category are similar, basically universal, Ni-MH battery discharge characteristics are very good, very smooth discharge curve, consumption of electricity is about to end, the voltage suddenly drops, which is close to the nickel-chromium batteries, but not as good as instantaneous discharge current nickel-chromium JVC GR-DX35K battery. In addition, the nickel-metal hydride batteries used mercury-free design, which is of great significance for environmental protection.
Ni-MH battery structure:
AA Ni-MH battery with the same shape as ordinary AA batteries. With the nickel-chromium batteries, like nickel-metal hydride batteries used reversible chemical reaction to achieve the charge and discharge process. Therefore, in the process of charging and discharging the JVC GR-DX37 battery will produce a large number of gas inside the battery internal pressure is relatively large, therefore, nickel-metal hydride batteries are used in the design of the exhaust vent to prevent excessive internal pressure due to an explosion. Currently we have come into contact with GP series battery, why not see the vent, because the battery is installed at the top of a circular plastic film, used to prevent blockage and prevent the positive vent cap of the shell with the negative short-circuit.
the battery memory effect:
The so-called memory effect refers to the battery charging and discharging process, the chemical composition of the internal battery is determined, in one region can not continue to produce a chemical reaction phenomenon. With an example: When a JVC GR-DX45 battery is fully charged, it can be a continuous electrical discharge 60 minutes. Now we will use this section to conduct the battery of this electric discharge, discharge to 30 minutes to stop, and then this section of the battery charge, charge a good 30 minutes after power to continue to discharge, do not completely discharged each time, after N repeated operations This batteries have a memory effect, the process of using in the future, when the JVC GR-DX300 battery discharge after 30 minutes, it is no longer output current, and that is, the battery capacity of this section reduced by half. Of course, we now use nickel-metal hydride batteries in general this phenomenon does not occur, it is because the chemical composition of nickel-metal hydride batteries and nickel-chromium batteries different. Ni-Cr battery memory effect is very serious. Here, we recommend to
Qi source of liquid crystal display power consumption of the charger can charge and discharge a single-click View
the Panasonic Camcorder battery charge:
Is slightly different batteries and Ni-Cr, Ni-Cr battery is a constant pulse of direct current to recharge, while the nickel-metal hydride batteries using a small ripple, the relatively smooth direct current to recharge. In urgent cases, the two chargers are interoperable. Charge should be to master the appropriate charge current, how to estimate the appropriate charge current do? This is according to the battery capacity to decide. In general, civil panasonic CGA-DU07 battery standard 16 hours to charge, charge current is: battery capacity / 10, units mA. There are fast-charge, fast charge current standard of 2.5 ~ 5-fold, there is no uniform standard. Our selection of chargers, they should try to use the standard charger, how to determine the charge current chargers do? When we buy a charger, looking for a JS or own a multimeter multimeter, plug charger power supply, multimeter appropriated for DC current 500mA stall, red table pen charger then panasonic CGA-DU06 battery cathode film, the black table pen then negative films, which , we can approximate by multimeter readings to determine charger charging current, because the battery's internal resistance is small, so close to the actual meter reading charge current. We can also use a number of auto-charger, the advantage of such a charger automatically stops charging the wires do not have to worry about people. In addition, we should try to avoid the use of fast-charging, fast charging, the battery's internal chemical reaction is very severe, the temperature is also high, and this will accelerate the aging of the battery and shorten panasonic CGA-DU14 battery life. However, when you go out or emergency quick charger, but a very useful oh.
commonly used in batteries, nickel-metal hydride batteries, nickel-chromium batteries, alkaline JVC GR-DX48 battery ... Since most digital cameras use AA Ni-MH battery power to do so in this article for AA Ni-MH battery for about focus .
Ni-MH battery features:
Nickel-metal hydride JVC Camcorder Battery (NIMH) is a modern electronic products, the most widely used battery, one green with a single large capacity, discharge characteristics of a smooth, high universality, heat a small and so on. The disadvantage is that bulky, self-weight large.
Ni-MH battery features:
Ni-MH battery nominal voltage of 1.2V, in the case of sufficient power up to 1.35V, with common AA alkaline battery category are similar, basically universal, Ni-MH battery discharge characteristics are very good, very smooth discharge curve, consumption of electricity is about to end, the voltage suddenly drops, which is close to the nickel-chromium batteries, but not as good as instantaneous discharge current nickel-chromium JVC GR-DX35K battery. In addition, the nickel-metal hydride batteries used mercury-free design, which is of great significance for environmental protection.
Ni-MH battery structure:
AA Ni-MH battery with the same shape as ordinary AA batteries. With the nickel-chromium batteries, like nickel-metal hydride batteries used reversible chemical reaction to achieve the charge and discharge process. Therefore, in the process of charging and discharging the JVC GR-DX37 battery will produce a large number of gas inside the battery internal pressure is relatively large, therefore, nickel-metal hydride batteries are used in the design of the exhaust vent to prevent excessive internal pressure due to an explosion. Currently we have come into contact with GP series battery, why not see the vent, because the battery is installed at the top of a circular plastic film, used to prevent blockage and prevent the positive vent cap of the shell with the negative short-circuit.
the battery memory effect:
The so-called memory effect refers to the battery charging and discharging process, the chemical composition of the internal battery is determined, in one region can not continue to produce a chemical reaction phenomenon. With an example: When a JVC GR-DX45 battery is fully charged, it can be a continuous electrical discharge 60 minutes. Now we will use this section to conduct the battery of this electric discharge, discharge to 30 minutes to stop, and then this section of the battery charge, charge a good 30 minutes after power to continue to discharge, do not completely discharged each time, after N repeated operations This batteries have a memory effect, the process of using in the future, when the JVC GR-DX300 battery discharge after 30 minutes, it is no longer output current, and that is, the battery capacity of this section reduced by half. Of course, we now use nickel-metal hydride batteries in general this phenomenon does not occur, it is because the chemical composition of nickel-metal hydride batteries and nickel-chromium batteries different. Ni-Cr battery memory effect is very serious. Here, we recommend to
Qi source of liquid crystal display power consumption of the charger can charge and discharge a single-click View
the Panasonic Camcorder battery charge:
Is slightly different batteries and Ni-Cr, Ni-Cr battery is a constant pulse of direct current to recharge, while the nickel-metal hydride batteries using a small ripple, the relatively smooth direct current to recharge. In urgent cases, the two chargers are interoperable. Charge should be to master the appropriate charge current, how to estimate the appropriate charge current do? This is according to the battery capacity to decide. In general, civil panasonic CGA-DU07 battery standard 16 hours to charge, charge current is: battery capacity / 10, units mA. There are fast-charge, fast charge current standard of 2.5 ~ 5-fold, there is no uniform standard. Our selection of chargers, they should try to use the standard charger, how to determine the charge current chargers do? When we buy a charger, looking for a JS or own a multimeter multimeter, plug charger power supply, multimeter appropriated for DC current 500mA stall, red table pen charger then panasonic CGA-DU06 battery cathode film, the black table pen then negative films, which , we can approximate by multimeter readings to determine charger charging current, because the battery's internal resistance is small, so close to the actual meter reading charge current. We can also use a number of auto-charger, the advantage of such a charger automatically stops charging the wires do not have to worry about people. In addition, we should try to avoid the use of fast-charging, fast charging, the battery's internal chemical reaction is very severe, the temperature is also high, and this will accelerate the aging of the battery and shorten panasonic CGA-DU14 battery life. However, when you go out or emergency quick charger, but a very useful oh.
Tuesday, March 23, 2010
Maintenance Note
Maintenance Note
For the use of alkaline JVC GR-DX300 battery of the user, as already mentioned, bear in mind is that he finished in the use of digital cameras, will surely remember that removing the battery to avoid battery fluid flow phenomena causing damage to machines.
As for the use of rechargeable nickel-metal hydride JVC GR-DX45 battery and lithium batteries users. The battery charge is very particular about, and bought back the battery power is low or no power in general, the first charge must be adequate. Lithium battery charging time are generally more than 8 hours, while the Ni-MH JVC GR-DX37 battery charging time are generally more than 16 hours. To achieve the best results, that is, the battery reached its maximum power, there are generally three or more times repeated charge-discharge can. Batteries in use three times, the best place to find the opportunity to make a further charge fully recharge, so as not there is residual power in the JVC GR-DX35K battery when the repeated charge, or will shorten battery life. Battery charging and exhausted tend to be more heat, it is best to be cooled and then loaded camera battery.
However, note that the lithium batteries because there is no memory effect, so do not discharge, otherwise it will destroy the battery structure, and loss of battery life.
In addition, in order to avoid the loss of electricity, use nickel-metal hydride battery user, remove the battery charge after the power end, do not let the JVC GR-DX48 battery poles in contact with conductors at the same time, for example, do not use your fingers at the same time at both ends of the battery contacts. The use of lithium batteries users should try to keep the camera battery box battery positive and negative contact points clean, if necessary, you can use a dry cloth gently wipe the swab and then into the JVC BN-V114 battery.
Also need to note that, even if the user is to use lithium batteries in the long run does not use a digital camera, it can be completely discharged, remove the battery, stored in a dry, cool environment. The other should be noted that, whether it is the use of nickel-metal hydride JVC BN-V15 battery or lithium batteries of users, it is best not to have a good electrical charge the battery on the bag, pocket, bag or container with metal objects in order to prevent short-circuit .
For the use of alkaline JVC GR-DX300 battery of the user, as already mentioned, bear in mind is that he finished in the use of digital cameras, will surely remember that removing the battery to avoid battery fluid flow phenomena causing damage to machines.
As for the use of rechargeable nickel-metal hydride JVC GR-DX45 battery and lithium batteries users. The battery charge is very particular about, and bought back the battery power is low or no power in general, the first charge must be adequate. Lithium battery charging time are generally more than 8 hours, while the Ni-MH JVC GR-DX37 battery charging time are generally more than 16 hours. To achieve the best results, that is, the battery reached its maximum power, there are generally three or more times repeated charge-discharge can. Batteries in use three times, the best place to find the opportunity to make a further charge fully recharge, so as not there is residual power in the JVC GR-DX35K battery when the repeated charge, or will shorten battery life. Battery charging and exhausted tend to be more heat, it is best to be cooled and then loaded camera battery.
However, note that the lithium batteries because there is no memory effect, so do not discharge, otherwise it will destroy the battery structure, and loss of battery life.
In addition, in order to avoid the loss of electricity, use nickel-metal hydride battery user, remove the battery charge after the power end, do not let the JVC GR-DX48 battery poles in contact with conductors at the same time, for example, do not use your fingers at the same time at both ends of the battery contacts. The use of lithium batteries users should try to keep the camera battery box battery positive and negative contact points clean, if necessary, you can use a dry cloth gently wipe the swab and then into the JVC BN-V114 battery.
Also need to note that, even if the user is to use lithium batteries in the long run does not use a digital camera, it can be completely discharged, remove the battery, stored in a dry, cool environment. The other should be noted that, whether it is the use of nickel-metal hydride JVC BN-V15 battery or lithium batteries of users, it is best not to have a good electrical charge the battery on the bag, pocket, bag or container with metal objects in order to prevent short-circuit .
Sunday, March 21, 2010
Battery for digital cameras
Battery for digital cameras
is the key to a key, probably second in importance only lens, and want to photograph in Convenience, a powerful panasonic PV-BP17 battery to provide power as a follow-up is essential. But even the best battery time, if not be properly carry out maintenance and maintenance, will not be long before lost a strong momentum, so battery maintenance is very important.
Battery Maintenance
For a (section) digital camera panasonic VW-VBD210 battery, the use of the length of time, not only with the quality, power on, in fact, with the user's operation also has great relevance. Most photographers are accustomed, after each time the camera runs out of place inside the camera bags, or placed inside cabinets, batteries are not out to save individually, this approach sounds like there is no problem, but not conducive to battery protection.
Battery Maintenance
Generally speaking, if more than 15 days do not use the camera, then best to remove the panasonic CGA-DU21 battery from the camera inside a separate storage, preservation of the environment is best dry and shady place, and do not store the battery together with metal objects.
According to our survey, is currently in the market you can buy the majority of digital cameras use lithium batteries, it is relatively easy storage. The only caveat is that the long-term is not used, preferably at intervals of 2 months, once to activate the battery, that is, charge and discharge time, this can effectively extend panasonic CGA-DU14 battery life.
As for the Ni-MH battery 5, the most annoying is the memory effect, this effect will reduce the total capacity of the battery and the use of time, and as time goes on, less and less stored charge, the battery also will consume the more to faster. Therefore, we should try to be all used up rechargeable power, each charge must be sufficient to power the most full.
If you go out when the temporary use of alkaline panasonic CGA-DU06 battery, we must remember that in time out, or else a long time if not used, the battery is easy to Tangshui corrosion circuit, the camera could not escape the destiny scrapped.
Note the use of Operation
1, to avoid the frequent use of flash, if you are not a professional photographer who, then, except in the invisible fingers of the night, normal daytime light intensity for the average digital camera panasonic CGA-DU07 battery for sufficient.
2, as far as possible to avoid unnecessary operation of the zoom. Zoom the camera lens Yi Shen a shrink, very power. You can move the pace of hyperactivity, use the "manual zoom" approach to replace the "camera zoom" in order to save power.
3, if the case of small power, you can close the LCD screen, with screen viewfinder to adjust the composition, for example a digital camera, LCD should be considered as the most power-hungry components, ordinary digital camera Panasonic Camcorder battery, LCD screen is closed after the can be used when the length of time the original three-fold.
4, minimize the use of multi-shot and dynamic image video capture function, because the completion of these features is to use the built-in buffer body to temporarily save the screen shot, the power consumption a lot. post by laptop battery blog.
is the key to a key, probably second in importance only lens, and want to photograph in Convenience, a powerful panasonic PV-BP17 battery to provide power as a follow-up is essential. But even the best battery time, if not be properly carry out maintenance and maintenance, will not be long before lost a strong momentum, so battery maintenance is very important.
Battery Maintenance
For a (section) digital camera panasonic VW-VBD210 battery, the use of the length of time, not only with the quality, power on, in fact, with the user's operation also has great relevance. Most photographers are accustomed, after each time the camera runs out of place inside the camera bags, or placed inside cabinets, batteries are not out to save individually, this approach sounds like there is no problem, but not conducive to battery protection.
Battery Maintenance
Generally speaking, if more than 15 days do not use the camera, then best to remove the panasonic CGA-DU21 battery from the camera inside a separate storage, preservation of the environment is best dry and shady place, and do not store the battery together with metal objects.
According to our survey, is currently in the market you can buy the majority of digital cameras use lithium batteries, it is relatively easy storage. The only caveat is that the long-term is not used, preferably at intervals of 2 months, once to activate the battery, that is, charge and discharge time, this can effectively extend panasonic CGA-DU14 battery life.
As for the Ni-MH battery 5, the most annoying is the memory effect, this effect will reduce the total capacity of the battery and the use of time, and as time goes on, less and less stored charge, the battery also will consume the more to faster. Therefore, we should try to be all used up rechargeable power, each charge must be sufficient to power the most full.
If you go out when the temporary use of alkaline panasonic CGA-DU06 battery, we must remember that in time out, or else a long time if not used, the battery is easy to Tangshui corrosion circuit, the camera could not escape the destiny scrapped.
Note the use of Operation
1, to avoid the frequent use of flash, if you are not a professional photographer who, then, except in the invisible fingers of the night, normal daytime light intensity for the average digital camera panasonic CGA-DU07 battery for sufficient.
2, as far as possible to avoid unnecessary operation of the zoom. Zoom the camera lens Yi Shen a shrink, very power. You can move the pace of hyperactivity, use the "manual zoom" approach to replace the "camera zoom" in order to save power.
3, if the case of small power, you can close the LCD screen, with screen viewfinder to adjust the composition, for example a digital camera, LCD should be considered as the most power-hungry components, ordinary digital camera Panasonic Camcorder battery, LCD screen is closed after the can be used when the length of time the original three-fold.
4, minimize the use of multi-shot and dynamic image video capture function, because the completion of these features is to use the built-in buffer body to temporarily save the screen shot, the power consumption a lot. post by laptop battery blog.